PartsTable
Technical Data Sheet
Download PDF

113852 — DATA ANALYSIS CONTROL GROUP

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

113852: DATA ANALYSIS CONTROL GROUP.

The DATA ANALYSIS CONTROL GROUP is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.188 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.562 INCHES MINIMUM IN, screw_material: STEEL COMP 8740, fastener_length: 0.938 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-208-5907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 113852
NSN: 5305-00-208-5907
NIINs: 002085907, 004413959, 011578427, 013215339, 013519679
FSC: 5305 — Screws
CAGE: 06840 — BENDIX CORP THE (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.188 INCHES NOMINAL IN
thread_class3A A
thread_length0.562 INCHES MINIMUM IN
screw_materialSTEEL COMP 8740
fastener_length0.938 INCHES NOMINAL IN
hardness_rating28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
special_featuresMAGNETIC INSPECTION REQUIRED
thread_directionRIGHT-HAND
width_between_flats0.250 INCHES NOMINAL IN
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationAN/APN-141
NSN5305-00-208-5907
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 113852 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.188 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.938 INCHES NOMINAL IN
•
THREAD LENGTH: 0.563 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.188 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.938 INCHES NOMINAL IN
THREAD LENGTH0.563 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.250 INCHES NOMINAL IN
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 113852?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 113852?
113852 is a DATA ANALYSIS CONTROL GROUP. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 113852?
113852 is cataloged in the U.S. Government catalog under NSN 5305-00-208-5907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 113852

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.