PartsTable
Technical Data Sheet
11383 ✓ Verified by PartsTable
Jumbo · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_style: PLATE-MESHING, body_width: 4.500 INCHES NOMINAL IN, head_style: FILLISTER, lens_color: RED SINGLE LIGHT FIRST POSITION HORIZONTAL, point_type: CONVENTIONAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-064-0085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 11383
NSN: 5330-00-064-0085
FSC: 5330
CAGE: 25671 — JOY PETROLEUM EQUIPMENT FOSTER DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_stylePLATE-MESHING
body_width4.500 INCHES NOMINAL IN
head_styleFILLISTER
lens_colorRED SINGLE LIGHT FIRST POSITION HORIZONTAL
point_typeCONVENTIONAL
shaft_typeROUND, SLOTTED SINGLE SHAFT
body_height3.250 INCHES NOMINAL IN
body_length5.000 INCHES NOMINAL IN
head_height0.047 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
NSN5330-00-064-0085
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11383 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
T050-033-001REVFInterchangeable
interchangeable cross-reference
interchangeable
11383Interchangeable
interchangeable cross-reference
interchangeable
T050-033-0001Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCSZ56Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
DV77-58-89Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11383?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11383?
11383 is a CAPACITOR,VARIABLE,AIR DIELECTRI manufactured by Jumbo. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11383?
There are 13 known substitutes for 11383: T050-033-001REVF, 11383, T050-033-0001 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11383?
11383 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-064-0085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11383