PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11364DPCALL
11364DPCALL ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include material: PLASTIC BOTTOM RING, inside_diameter: 0.125 INCHES NOMINAL IN, outside_diameter: 0.540 INCHES NOMINAL IN, cross-sectional_shape_style: CUP BOTTOM RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-608-9320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11364DPCALL
NSN: 5330-00-608-9320
FSC: 5330
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialPLASTIC BOTTOM RING
inside_diameter0.125 INCHES NOMINAL IN
outside_diameter0.540 INCHES NOMINAL IN
cross-sectional_shape_styleCUP BOTTOM RING
NSN5330-00-608-9320
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11364DPCALL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.540 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP BOTTOM RING
•
INSIDE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: PLASTIC BOTTOM RING
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.540 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP BOTTOM RING
INSIDE DIAMETER0.125 INCHES NOMINAL IN
MATERIALPLASTIC BOTTOM RING
MATERIALPLASTIC TOP RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
0450-4168LUPInterchangeable
interchangeable cross-reference
interchangeable
55365Interchangeable
interchangeable cross-reference
interchangeable
AN2541-12Interchangeable
interchangeable cross-reference
interchangeable
2223RInterchangeable
interchangeable cross-reference
interchangeable
35632Interchangeable
interchangeable cross-reference
interchangeable
ITT POMONA3563-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11364DPCALL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11364DPCALL?
11364DPCALL is a PACKING ASSEMBLY.
What parts can replace 11364DPCALL?
There are 16 known substitutes for 11364DPCALL: 0450-4168LUP, 55365, AN2541-12 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11364DPCALL?
11364DPCALL is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-608-9320. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11364DPCALL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026