PartsTable
Intelligence Platform
Buy on eBay
PartsTable / COMPONENT / 11361
11361 ✓ Verified by PartsTable
Jumbo · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CAPACITOR,FIXED,ELECTROLYTIC is a Jumbo cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include length: 0.812 INCHES NOMINAL SQUARE END IN, material: STEEL OVERALL, bore_shape: STRAIGHT, point_type: CONVENTIONAL, body_length: 0.844 INCHES NOMINAL IN, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11361
NSN: 3110-00-156-7913
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
length0.812 INCHES NOMINAL SQUARE END IN
materialSTEEL OVERALL
bore_shapeSTRAIGHT
point_typeCONVENTIONAL
body_length0.844 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.375 INCHES NOMINAL IN
bore_diameter50.00 MILLIMETERS NOMINAL MM
overall_width1.1875 INCHES NOMINAL IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE PRIMARY
thread_length2.560 INCHES MINIMUM IN
NSN3110-00-156-7913
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11361 · Jumbo ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 90.00 MILLIMETERS NOMINAL MM
•
SHIELD QUANTITY: 1
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
NONDEFINITIVE SPEC/STD DATA: 146GR00 TYPE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
SHIELD QUANTITY1
BORE SHAPESTRAIGHT
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
MATERIALSTEEL OVERALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA146GR00 TYPE
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OVERALL
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
54924Interchangeable
interchangeable cross-reference
interchangeable
B94.9 1-8 UNC HS G H4Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE26 CUTTER6 PITCH24Interchangeable
interchangeable cross-reference
interchangeable
1940 PITC24 CUTTER6Interchangeable
interchangeable cross-reference
interchangeable
13098Interchangeable
interchangeable cross-reference
interchangeable
C01032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11361?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11361?
11361 is a CAPACITOR,FIXED,ELECTROLYTIC manufactured by Jumbo.
What parts can replace 11361?
There are 28 known substitutes for 11361: 54924, B94.9 1-8 UNC HS G H4, B94.19 TABLE26 CUTTER6 PITCH24 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11361?
11361 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Need a quote for 11361?

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
Last verified: July 2026