PartsTable
Technical Data Sheet
Download PDF

1134095-49 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1134095-49: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 8.000 INCHES NOMINAL IN, length: 2.000 INCHES NOMINAL IN, material: PLASTIC, corner_radius: 0.250 INCHES NOMINAL IN, hole_diameter: 0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, body_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-419-8410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1134095-49
NSN: 5340-01-419-8410
FSC: 5340 — Hardware, Commercial
CAGE: 00816 — PALOMAR PRODUCTS, INC. (USA)
SPECIFICATIONS
width8.000 INCHES NOMINAL IN
length2.000 INCHES NOMINAL IN
materialPLASTIC
corner_radius0.250 INCHES NOMINAL IN
hole_diameter0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
body_thickness0.125 INCHES NOMINAL IN
features_providedSPECIAL MARKING
securing_device_typeSPECIAL
peripheral_shape_styleRECTANGLE, MULTI HOLES
hole_quantity_along_width6
hole_quantity_along_length2
cross-sectional_shape_styleFLAT
NSN5340-01-419-8410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1134095-49 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 1.500 INCHES NOMINAL IN
•
CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
LENGTH: 2.000 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 0.781 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 2
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 2.500 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-512, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH1.500 INCHES NOMINAL IN
CORNER RADIUS0.250 INCHES NOMINAL IN
LENGTH2.000 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH0.781 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH2
DISTANCE BETWEEN HOLES ALONG WIDTH2.500 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-512, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT
FEATURES PROVIDEDSPECIAL MARKING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1104109Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1134095-49?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1134095-49?
1134095-49 is a COVER,ACCESS.
What parts can replace 1134095-49?
There is 1 known substitute for 1134095-49: 1104109. Substitute compatibility should be verified for your specific system.
What is the NSN for 1134095-49?
1134095-49 is cataloged in the U.S. Government catalog under NSN 5340-01-419-8410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1134095-49

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.