PartsTable
Technical Data Sheet
Download PDF

113365B — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

113365B: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, pin_diameter: 0.180 INCHES NOMINAL IN, overall_length: 61.000 INCHES NOMINAL IN, performance_type: NOT RATED, pin_removability: NONREMOVABLE, special_features: 16 HOLES 0.220 IN. DIAMETER IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-113-8680, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
113365B
NSN: 5340-01-113-8680
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
pin_diameter0.180 INCHES NOMINAL IN
overall_length61.000 INCHES NOMINAL IN
knuckle_quantity1
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
special_features16 HOLES 0.220 IN. DIAMETER IN
style_designatorBUTT
material_thickness0.064 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.220 INCHES NOMINAL IN
NSN5340-01-113-8680
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 113365B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.180 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.220 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.000 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.180 INCHES NOMINAL IN
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.220 INCHES NOMINAL IN
OVERALL LENGTH61.000 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.000 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
KNUCKLE QUANTITY1
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
64-7-566-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 113365B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 113365B?
113365B is a HINGE,BUTT.
What parts can replace 113365B?
There is 1 known substitute for 113365B: 64-7-566-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 113365B?
113365B is cataloged in the U.S. Government catalog under NSN 5340-01-113-8680. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 113365B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.