PartsTable
Technical Data Sheet
Download PDF

1132002G35 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1132002G35: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OVERALL, nut_style: SPLINE, nut_height: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, nut_diameter: 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN, pilot_length: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-327-0933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1132002G35
NSN: 5310-01-327-0933
FSC: 5310 — Nuts and Washers
CAGE: 31550 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OVERALL
nut_styleSPLINE
nut_height0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
nut_diameter0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
pilot_length0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
pilot_diameter0.278 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
nominal_thread_size0.190 INCHES IN
counterbore_diameter0.223 INCHES MINIMUM AND 0.233 INCHES MAXIMUM FIRST END IN
NSN5310-01-327-0933
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1132002G35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
NUT COUNTERBORE DEPTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM FIRST END IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
COUNTERBORE DIAMETER: 0.223 INCHES MINIMUM AND 0.233 INCHES MAXIMUM FIRST END IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NUT COUNTERBORE DEPTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM FIRST END IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
COUNTERBORE DIAMETER0.223 INCHES MINIMUM AND 0.233 INCHES MAXIMUM FIRST END IN
PILOT DIAMETER0.278 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
PILOT LENGTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
6254C-SS-1032-6BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1132002G35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1132002G35?
1132002G35 is a NUT,PLAIN,SPLINE.
What parts can replace 1132002G35?
There is 1 known substitute for 1132002G35: 6254C-SS-1032-6B. Substitute compatibility should be verified for your specific system.
What is the NSN for 1132002G35?
1132002G35 is cataloged in the U.S. Government catalog under NSN 5310-01-327-0933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1132002G35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.