PartsTable
Technical Data Sheet
Download PDF

11310644 ITEM 2 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11310644 ITEM 2: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2B ROD CONNECTION, tongue_width: 8.937 INCHES MINIMUM AND 9.062 INCHES MAXIMUM IN, thread_length: 2.281 INCHES NOMINAL ROD CONNECTION IN, style_designator: CONNECTOR, thread_direction: RIGHT-HAND ROD CONNECTION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-200-6187, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11310644 ITEM 2
NSN: 5340-01-200-6187
FSC: 5340 — Hardware, Commercial
CAGE: K0189 — KONGSBERG MARITIME LTD DIV KONGSBERG MARITIME (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2B ROD CONNECTION
tongue_width8.937 INCHES MINIMUM AND 9.062 INCHES MAXIMUM IN
thread_length2.281 INCHES NOMINAL ROD CONNECTION IN
style_designatorCONNECTOR
thread_directionRIGHT-HAND ROD CONNECTION
tongue_thickness4.093 INCHES NOMINAL IN
shank_outside_diameter3.500 INCHES NOMINAL IN
metallic_hardness_rating24.0 MINIMUM ROCKWELL C AND 31.0 MAXIMUM ROCKWELL C
rod_connection_bore_depth3.625 INCHES NOMINAL IN
rod_connection_end_length3.625 INCHES NOMINAL IN
securing_pin_hole_diameter0.375 INCHES NOMINAL IN
NSN5340-01-200-6187
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11310644 ITEM 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 4.093 INCHES NOMINAL IN
•
TONGUE WIDTH: 8.937 INCHES MINIMUM AND 9.062 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 2.281 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CONNECTOR
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
SHANK OUTSIDE DIAMETER: 3.500 INCHES NOMINAL IN
•
ROD CONNECTION END LENGTH: 3.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS4.093 INCHES NOMINAL IN
TONGUE WIDTH8.937 INCHES MINIMUM AND 9.062 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.375 INCHES NOMINAL IN
THREAD LENGTH2.281 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCONNECTOR
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
SHANK OUTSIDE DIAMETER3.500 INCHES NOMINAL IN
ROD CONNECTION END LENGTH3.625 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER7.970 INCHES NOMINAL IN
THREAD CLASS2B ROD CONNECTION
SUBSTITUTES & CROSS-REFERENCES 2
12002018Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5833620Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11310644 ITEM 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11310644 ITEM 2?
11310644 ITEM 2 is a CONNECTOR,ROD END.
What parts can replace 11310644 ITEM 2?
There are 2 known substitutes for 11310644 ITEM 2: 12002018, 5833620. Substitute compatibility should be verified for your specific system.
What is the NSN for 11310644 ITEM 2?
11310644 ITEM 2 is cataloged in the U.S. Government catalog under NSN 5340-01-200-6187. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11310644 ITEM 2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.