PartsTable
Technical Data Sheet
Download PDF

113104 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

113104: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.312 INCHES NOMINAL IN, head_style: HEXAGON, nut_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-3104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 113104
NSN: 5310-00-011-3104
NIINs: 000113104, 001881872, 008156846, 012883399, 012969832, 013842096, 016103214
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
body_styleRECTANGULAR W/MOUNTING HOLES/SLOTS
body_width0.312 INCHES NOMINAL IN
head_styleHEXAGON
nut_height0.125 INCHES NOMINAL IN
body_height0.190 INCHES NOMINAL IN
body_length1.140 INCHES NOMINAL IN
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.120 INCHES NOMINAL IN
thread_class2A A
NSN5310-00-011-3104
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 113104 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.125 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
5310000113104Reference document
Same NSN cross-reference
Reference document — Informative reference only
FFN836Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 113104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 113104?
113104 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 113104?
There are 2 known substitutes for 113104: 5310000113104, FFN836. Substitute compatibility should be verified for your specific system.
What is the NSN for 113104?
113104 is cataloged in the U.S. Government catalog under NSN 5310-00-011-3104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 113104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.