PartsTable
Technical Data Sheet
Download PDF

113-212 — 113-212

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

113-212: 113-212.

- Amplifier which increases the signal strength. - 1-channel class D mono amplifier. - Linkable/bass remote control incl.

5m cable. - 1x 1700W / 3200W / 5800W @ 4 / 2 / 1 ohms. Key specifications include material: STEEL OVERALL, body_width: 2.000 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN, head_style: HEXAGON, body_height: 3.251 INCHES MINIMUM AND 3.438 INCHES MAXIMUM IN, body_length: 2.625 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-028-8752, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 113-212
NSN: 5305-01-028-8752
NIINs: 010288752, 011356090, 012139450, 012312078, 015904135
FSC: 5305 — Screws
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width2.000 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
head_styleHEXAGON
body_height3.251 INCHES MINIMUM AND 3.438 INCHES MAXIMUM IN
body_length2.625 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
scale_range+0.1 TO 60.0 POUNDS PER SQUARE INCH SINGLE INDICATOR SINGLE SCALE LBS
thread_class2A A
thread_length3.000 INCHES MINIMUM IN
inclosure_typeHERMETICALLY SEALED
fastener_length3.500 INCHES NOMINAL IN
special_featuresUSED ON A CONVEYOR SHAFT
NSN5305-01-028-8752
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 113-212 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.500 INCHES NOMINAL IN
•
THREAD LENGTH: 3.000 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH3.500 INCHES NOMINAL IN
THREAD LENGTH3.000 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 3
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
PL-E185B001 PC 188Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A120038C350Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 113-212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 113-212?
113-212 is a 113-212 manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 113-212?
There are 3 known substitutes for 113-212: FF-S-85, PL-E185B001 PC 188, A120038C350. Substitute compatibility should be verified for your specific system.
What is the NSN for 113-212?
113-212 is cataloged in the U.S. Government catalog under NSN 5305-01-028-8752. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 113-212

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.