PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 112H0-9

112H0-9 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_shape: STRAIGHT, bore_diameter: 2.3620 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN, contact_angle: 15.0 DEGREES NOMINAL, overall_width: 0.7027 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-360-1196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
112H0-9
NSN: 3110-01-360-1196
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
bore_shapeSTRAIGHT
bore_diameter2.3620 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN
contact_angle15.0 DEGREES NOMINAL
overall_width0.7027 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter3.7397 INCHES MINIMUM AND 3.7403 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.5
NSN3110-01-360-1196
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 112H0-9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.7397 INCHES MINIMUM AND 3.7403 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC PHENOLIC RETAINER
•
CONTACT ANGLE: 15.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.7397 INCHES MINIMUM AND 3.7403 INCHES MAXIMUM IN
MATERIALPLASTIC PHENOLIC RETAINER
OVERALL WIDTH0.7027 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM IN
MATERIALSTEEL COMP E52100 INNER RING
MATERIALSTEEL COMP E52100 BALL
CONTACT ANGLE15.0 DEGREES NOMINAL
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL COMP E52100 OUTER RING
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
874533-2Interchangeable
interchangeable cross-reference
interchangeable
8426XS2Interchangeable
interchangeable cross-reference
interchangeable
174812Interchangeable
interchangeable cross-reference
interchangeable
CF250-309Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 112H0-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 112H0-9?
112H0-9 is a BEARING,BALL,ANNULAR.
What parts can replace 112H0-9?
There are 4 known substitutes for 112H0-9: 874533-2, 8426XS2, 174812 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 112H0-9?
112H0-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-360-1196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 112H0-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026