PartsTable
Technical Data Sheet
Download PDF

1128LM40301-11 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1128LM40301-11: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 0.281 INCHES NOMINAL IN, fork_depth: 0.438 INCHES NOMINAL IN, shank_length: 3.000 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.191 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL ROD CONNECTION IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-426-2592, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1128LM40301-11
NSN: 5340-00-426-2592
FSC: 5340 — Hardware, Commercial
CAGE: 79RG9 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
end_radius0.281 INCHES NOMINAL IN
fork_depth0.438 INCHES NOMINAL IN
shank_length3.000 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.191 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.312 INCHES NOMINAL IN
fork_span_width0.156 INCHES NOMINAL IN
overall_diameter0.562 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCADMIUM OVERALL
NSN5340-00-426-2592
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1128LM40301-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.312 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.156 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.062 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.562 INCHES NOMINAL IN
•
END RADIUS: 0.281 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.312 INCHES NOMINAL IN
FORK SPAN WIDTH0.156 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
FORK ARM THICKNESS0.062 INCHES NOMINAL IN
OVERALL DIAMETER0.562 INCHES NOMINAL IN
END RADIUS0.281 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH3.000 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1128LM40301-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1128LM40301-11?
1128LM40301-11 is a CLEVIS,ROD END.
What is the NSN for 1128LM40301-11?
1128LM40301-11 is cataloged in the U.S. Government catalog under NSN 5340-00-426-2592. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1128LM40301-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.