1128AS124-1 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1128AS124-1: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 11, inside_diameter: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, surface_treatment: OXIDE OVERALL, spring_free_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-01-315-5653, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1128AS124-1

NSN: 5360-01-315-5653
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	11
inside_diameter	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
surface_treatment	OXIDE OVERALL
spring_free_length	0.375 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter	0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
surface_treatment_document_and_classification	MIL-C-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN	5360-01-315-5653

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

SPRING FREE LENGTH: 0.375 INCHES NOMINAL IN

•

INSIDE DIAMETER: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN

•

COIL QUANTITY: 11

•

SURFACE TREATMENT: OXIDE OVERALL

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CYLINDRICAL
SPRING FREE LENGTH	0.375 INCHES NOMINAL IN
INSIDE DIAMETER	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
COIL QUANTITY	11
SURFACE TREATMENT	OXIDE OVERALL
COIL HELIX DIRECTION	RIGHT-HAND OR LEFT-HAND

OTHER ITEMS IN FSC 5360 — Coil, Flat, Leaf, and Wire Springs

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5360-00-001-1842 5360-00-001-1945 5360-00-001-2010 5360-00-001-3865 5360-00-001-3950 5360-00-001-4650 5360-00-001-4664 5360-00-001-4703

SUBSTITUTES & CROSS-REFERENCES 1

1128AS124Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1128AS124-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1128AS124-1?

1128AS124-1 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 1128AS124-1?

There is 1 known substitute for 1128AS124-1: 1128AS124. Substitute compatibility should be verified for your specific system.

What is the NSN for 1128AS124-1?

1128AS124-1 is cataloged in the U.S. Government catalog under NSN 5360-01-315-5653. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1128AS124-1 — SPRING,HELICAL,COMPRESSION

Request a Quote — 1128AS124-1