PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 112724
112724 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: FLANGE ALL ENDS, inside_diameter: 1.50 INCHES NOMINAL IN, connection_style: PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) ALL ENDS, outside_diameter: 2.26 INCHES NOMINAL IN, operating_pressure: 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-2724, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
112724
NSN: 5310-00-011-2724
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeFLANGE ALL ENDS
inside_diameter1.50 INCHES NOMINAL IN
connection_stylePLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) ALL ENDS
outside_diameter2.26 INCHES NOMINAL IN
operating_pressure5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure20000.0 POUNDS PER SQUARE INCH LBS
end_flange_constructionSPLIT ALL ENDS
flange_outside_diameter2.50 INCHES NOMINAL ALL ENDS IN
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
cross-sectional_shape_styleROUND
measuring_method_and_length30.0 INCHES NOMINAL OVERALL IN
NSN5310-00-011-2724
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 112724 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1 STYLE AND A CLASS
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
OUTSIDE DIAMETER: 0.975 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.573 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.113 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA1 STYLE AND A CLASS
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
OUTSIDE DIAMETER0.975 INCHES MAXIMUM IN
HOLE DIAMETER0.573 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
MATERIAL THICKNESS0.113 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
GGG-K-00450Interchangeable
interchangeable cross-reference
interchangeable
00190Interchangeable
interchangeable cross-reference
interchangeable
X19Interchangeable
interchangeable cross-reference
interchangeable
04665Interchangeable
interchangeable cross-reference
interchangeable
ERM5330Interchangeable
interchangeable cross-reference
interchangeable
10016954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 112724?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 112724?
112724 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 112724?
There are 17 known substitutes for 112724: GGG-K-00450, 00190, X19 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 112724?
112724 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-2724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 112724

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026