PartsTable
Technical Data Sheet
Download PDF

11269296-2 — NUT,PLAIN,EXTENDED WASHER,HEXAGO

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11269296-2: NUT,PLAIN,EXTENDED WASHER,HEXAGO.

NUT,PLAIN,EXTENDED WASHER,HEXAGO. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, thread_class: 3B, thread_series: UNF, overall_height: 0.227 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-868-1929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11269296-2
NSN: 5310-00-868-1929
FSC: 5310 — Nuts and Washers
CAGE: 17773 — BALLISTIC MISSILE DEFENSE SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
thread_class3B
thread_seriesUNF
overall_height0.227 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
washer_outside_diameter0.320 INCHES NOMINAL IN
thread_quantity_per_inch32
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-868-1929
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11269296-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.320 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.227 INCHES NOMINAL IN
WASHER OUTSIDE DIAMETER0.320 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 2
GN510AE3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
52LH4367-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11269296-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11269296-2?
11269296-2 is a NUT,PLAIN,EXTENDED WASHER,HEXAGO.
What parts can replace 11269296-2?
There are 2 known substitutes for 11269296-2: GN510AE3, 52LH4367-02. Substitute compatibility should be verified for your specific system.
What is the NSN for 11269296-2?
11269296-2 is cataloged in the U.S. Government catalog under NSN 5310-00-868-1929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11269296-2