PartsTable / COMPONENT / 11238D
11238D
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.125 INCHES NOMINAL IN, special_features: FIBER MATERIAL, style_designator: NON-CIRCULAR, aperture_diameter: 3.875 INCHES NOMINAL IN, bolt_circle_diameter: 5.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-145-8219, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11238D
NSN: 5330-00-145-8219 FSC: 5330 CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
hole_diameter 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 6.125 INCHES NOMINAL IN special_features FIBER MATERIAL style_designator NON-CIRCULAR aperture_diameter 3.875 INCHES NOMINAL IN bolt_hole_quantity 3 bolt_circle_diameter 5.250 INCHES NOMINAL IN outside_corner_radius 0.438 INCHES NOMINAL IN cross-sectional_thickness 0.0156 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION side_radius_from_gasket_center 2.375 INCHES NOMINAL IN NSN 5330-00-145-8219
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 11238D
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• APERTURE DIAMETER: 3.875 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• BOLT CIRCLE DIAMETER: 5.250 INCHES NOMINAL IN
• CROSS-SECTIONAL THICKNESS: 0.0156 INCHES NOMINAL IN
• STYLE DESIGNATOR: NON-CIRCULAR
• OUTSIDE CORNER RADIUS: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER 3.875 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION BOLT CIRCLE DIAMETER 5.250 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.0156 INCHES NOMINAL IN BOLT HOLE QUANTITY 3 OVERALL WIDTH 6.125 INCHES NOMINAL IN STYLE DESIGNATOR NON-CIRCULAR OUTSIDE CORNER RADIUS 0.438 INCHES NOMINAL IN SPECIAL FEATURES FIBER MATERIAL HOLE DIAMETER 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
422839 Interchangeable interchangeable cross-reference
interchangeable
7259 Interchangeable interchangeable cross-reference
interchangeable
D7259 Interchangeable interchangeable cross-reference
interchangeable
7610947 Interchangeable interchangeable cross-reference
interchangeable
508330 Interchangeable interchangeable cross-reference
interchangeable
8108304 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 11238D?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11238D?
11238D is a GASKET.
What parts can replace 11238D?
There are 11 known substitutes for 11238D: 422839, 7259, D7259 and 8 more. Substitute compatibility should be verified for your specific system.
Is 11238D still available?
11238D is currently cancelled.