PartsTable
Technical Data Sheet
Download PDF

1120C — PRINTER,AUTOMATIC DATA PROCESSIN

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

1120C: PRINTER,AUTOMATIC DATA PROCESSIN.

PRINTER,AUTOMATIC DATA PROCESSIN. Key specifications include material: COPPER ALLOY OVERALL, head_style: KNURLED NO. 2, head_height: 0.375 INCHES NOMINAL IN, point_style: FLAT, thread_class: 2A A, head_diameter: 0.438 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-510-6516, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 1120C
NSN: 5305-00-510-6516
NIINs: 005106516, 014644073
FSC: 5305 — Screws
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
head_styleKNURLED NO. 2
head_height0.375 INCHES NOMINAL IN
point_styleFLAT
thread_class2A A
head_diameter0.438 INCHES NOMINAL IN
thread_length0.406 INCHES MINIMUM IN
fastener_length0.406 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentNICKEL OVERALL
end_item_identificationMODE-S
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-510-6516
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 1120C OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 1120C MFR OEM
KEY FEATURES
•
HEAD HEIGHT: 0.375 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.406 INCHES NOMINAL IN
•
THREAD LENGTH: 0.406 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: KNURLED NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
•
SURFACE TREATMENT: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.375 INCHES NOMINAL IN
FASTENER LENGTH0.406 INCHES NOMINAL IN
THREAD LENGTH0.406 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEKNURLED NO. 2
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SURFACE TREATMENTNICKEL OVERALL
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 2
X1120CReference document
Same NSN cross-reference
Reference document — Secondary reference
MF24Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1120C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1120C?
1120C is a PRINTER,AUTOMATIC DATA PROCESSIN. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 1120C?
There are 2 known substitutes for 1120C: X1120C, MF24. Substitute compatibility should be verified for your specific system.
What is the NSN for 1120C?
1120C is cataloged in the U.S. Government catalog under NSN 5305-00-510-6516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1120C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.