PartsTable
Technical Data Sheet
Download PDF

112-50R0M — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

112-50R0M: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL TAB/FLANGE MOUNTED, body_length: 0.453 INCHES NOMINAL IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE, body_diameter: 0.813 INCHES NOMINAL IN, overall_length: 0.453 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5905-00-897-9658, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 112-50R0M
NSN: 5905-00-897-9658
FSC: 5905 — Resistor
CAGE: 11237 — CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP (USA)
SPECIFICATIONS
body_styleCYLINDRICAL TAB/FLANGE MOUNTED
body_length0.453 INCHES NOMINAL IN
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
body_diameter0.813 INCHES NOMINAL IN
overall_length0.453 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
overall_diameter1.250 INCHES NOMINAL IN
section_quantity1
features_providedGROUNDED CONTACT ARM
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
reliability_indicatorNOT ESTABLISHED
mounting_hole_diameter0.136 INCHES NOMINAL IN
NSN5905-00-897-9658
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 112-50R0M MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
BODY DIAMETER: 0.813 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE PER SECTION: 50.0 OHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 105.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
MOUNTING FACILITY QUANTITY: 2
•
BODY STYLE: CYLINDRICAL TAB/FLANGE MOUNTED
•
OVERALL DIAMETER: 1.250 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.813 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION50.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
SECTION QUANTITY1
MOUNTING FACILITY QUANTITY2
BODY STYLECYLINDRICAL TAB/FLANGE MOUNTED
OVERALL DIAMETER1.250 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MOUNTING HOLE DIAMETER0.136 INCHES NOMINAL IN
OVERALL LENGTH0.453 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
2100-0020Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 112-50R0M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 112-50R0M?
112-50R0M is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 112-50R0M?
There is 1 known substitute for 112-50R0M: 2100-0020. Substitute compatibility should be verified for your specific system.
What is the NSN for 112-50R0M?
112-50R0M is cataloged in the U.S. Government catalog under NSN 5905-00-897-9658. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 112-50R0M

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.