PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 112-11GRAY
112-11GRAY ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, plate_width: 3.000 INCHES NOMINAL IN, plate_length: 5.000 INCHES NOMINAL IN, hole_diameter: 0.219 INCHES NOMINAL IN, inside_length: 3.750 INCHES NOMINAL IN, stock_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-852-7876, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
112-11GRAY
NSN: 5340-00-852-7876
FSC: 5340
CAGE: 98003 — NIELSEN HARDWARE CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
plate_width3.000 INCHES NOMINAL IN
plate_length5.000 INCHES NOMINAL IN
hole_diameter0.219 INCHES NOMINAL IN
inside_length3.750 INCHES NOMINAL IN
stock_diameter0.312 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance1.938 INCHES NOMINAL IN
style_designatorRECTANGULAR OPEN
surface_treatmentCADMIUM OVERALL
mounting_plate_styleRECTANGULAR
distance_between_ends2.750 INCHES NOMINAL IN
NSN5340-00-852-7876
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 112-11GRAY MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HANDLE CLEARANCE: 1.938 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RECTANGULAR
•
INSIDE LENGTH: 3.750 INCHES NOMINAL IN
•
PLATE LENGTH: 5.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PLATE WIDTH: 3.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR OPEN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HANDLE CLEARANCE1.938 INCHES NOMINAL IN
MOUNTING PLATE STYLERECTANGULAR
INSIDE LENGTH3.750 INCHES NOMINAL IN
PLATE LENGTH5.000 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
PLATE WIDTH3.000 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR OPEN
MATERIALSTEEL OVERALL
STOCK DIAMETER0.312 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
9M147-2Upgraded Successor
successor cross-reference
successor
11-2-11Upgraded Successor
successor cross-reference
successor
11-2Upgraded Successor
successor cross-reference
successor
2667003Interchangeable
interchangeable cross-reference
interchangeable
0042873Interchangeable
interchangeable cross-reference
interchangeable
0042873-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 112-11GRAY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 112-11GRAY?
112-11GRAY is a HANDLE,BAIL.
What parts can replace 112-11GRAY?
There are 15 known substitutes for 112-11GRAY: 9M147-2, 11-2-11, 11-2 and 12 more. Substitute compatibility should be verified for your specific system.
Is 112-11GRAY still available?
112-11GRAY is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 112-11GRAY

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026