PartsTable
Technical Data Sheet
Download PDF

112 5801 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

112 5801: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include nut_style: HEXAGON, nut_height: 9.5 MILLIMETERS NOMINAL MM, thread_series: ISO M, thread_direction: RIGHT-HAND, width_across_flats: 19.0 MILLIMETERS NOMINAL MM, bearing_surface_type: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-195-5845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
112 5801
NSN: 5310-01-195-5845
FSC: 5310 — Nuts and Washers
CAGE: 62445 — DEUTZ CORPORATION (USA)
SPECIFICATIONS
nut_styleHEXAGON
nut_height9.5 MILLIMETERS NOMINAL MM
thread_seriesISO M
thread_directionRIGHT-HAND
width_across_flats19.0 MILLIMETERS NOMINAL MM
bearing_surface_typeCHAMFERED
thread_tolerance_class6H INTERNAL
NSN5310-01-195-5845
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 112 5801 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 19.0 MILLIMETERS NOMINAL MM
•
THREAD TOLERANCE CLASS: 6H INTERNAL
•
THREAD SERIES: ISO M
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 9.5 MILLIMETERS NOMINAL MM
•
NUT STYLE: HEXAGON
•
BEARING SURFACE TYPE: CHAMFERED
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS19.0 MILLIMETERS NOMINAL MM
THREAD TOLERANCE CLASS6H INTERNAL
THREAD SERIESISO M
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT9.5 MILLIMETERS NOMINAL MM
NUT STYLEHEXAGON
BEARING SURFACE TYPECHAMFERED
SUBSTITUTES & CROSS-REFERENCES 2
1112858Reference document
Same NSN cross-reference
Reference document — Secondary reference
111 2861Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 112 5801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 112 5801?
112 5801 is a NUT,PLAIN,HEXAGON.
What parts can replace 112 5801?
There are 2 known substitutes for 112 5801: 1112858, 111 2861. Substitute compatibility should be verified for your specific system.
What is the NSN for 112 5801?
112 5801 is cataloged in the U.S. Government catalog under NSN 5310-01-195-5845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 112 5801

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.