PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 111F-6-2IN
111F-6-2IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND PLASTIC, temp_rating: 500.0 FAHRENHEIT DEGF, fabrication_method: BRAIDED, lubrication_material: OIL, cross-sectional_width: 0.125 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-618-3220, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111F-6-2IN
NSN: 5330-00-618-3220
FSC: 5330
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
materialASBESTOS AND PLASTIC
temp_rating500.0 FAHRENHEIT DEGF
fabrication_methodBRAIDED
lubrication_materialOIL
cross-sectional_width0.125 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
NSN5330-00-618-3220
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 111F-6-2IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.125 INCHES NOMINAL IN
•
TEMP RATING: 500.0 FAHRENHEIT DEGF
•
MATERIAL: ASBESTOS AND PLASTIC
•
LUBRICATION MATERIAL: OIL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
FABRICATION METHOD: BRAIDED
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.125 INCHES NOMINAL IN
TEMP RATING500.0 FAHRENHEIT DEGF
MATERIALASBESTOS AND PLASTIC
LUBRICATION MATERIALOIL
CROSS-SECTIONAL SHAPE STYLESQUARE
FABRICATION METHODBRAIDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
5862-1INSQInterchangeable
interchangeable cross-reference
interchangeable
4188-0064Interchangeable
interchangeable cross-reference
interchangeable
5876-150Interchangeable
interchangeable cross-reference
interchangeable
M24377-03Interchangeable
interchangeable cross-reference
interchangeable
HHP34TYPE1Interchangeable
interchangeable cross-reference
interchangeable
41888-0016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111F-6-2IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111F-6-2IN?
111F-6-2IN is a PACKING MATERIAL.
What parts can replace 111F-6-2IN?
There are 24 known substitutes for 111F-6-2IN: 5862-1INSQ, 4188-0064, 5876-150 and 21 more. Substitute compatibility should be verified for your specific system.
Is 111F-6-2IN still available?
111F-6-2IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111F-6-2IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026