PartsTable
Technical Data Sheet
11193A ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include degasser: INCLUDED, governor: NOT INCLUDED, material: ZINC BODY, float_type: DOUBLE, air_inlet_shape: STRAIGHT, automatic_choke: NOT INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11193A
NSN: 5330-00-154-7606
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
degasserINCLUDED
governorNOT INCLUDED
materialZINC BODY
float_typeDOUBLE
air_inlet_shapeSTRAIGHT
automatic_chokeNOT INCLUDED
barrel_quantity1
draft_directionHORIZONTAL
fording_featureNOT INCLUDED
special_featuresGRUNMAN A10 AIRCRAFT
accelerating_pumpNOT INCLUDED
vacuum_economizerNOT INCLUDED
NSN5330-00-154-7606
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11193A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEAL WIDTH: 0.469 INCHES NOMINAL IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
SEALING ELEMENT STYLE: ANGULAR
MATERIAL: LEATHER SEALING ELEMENT
HOUSING BORE DIAMETER: 2.875 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.469 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER SEALING ELEMENT
HOUSING BORE DIAMETER2.875 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
7185-012Interchangeable
interchangeable cross-reference
interchangeable
B12-4RInterchangeable
interchangeable cross-reference
interchangeable
50083Interchangeable
interchangeable cross-reference
interchangeable
11193Interchangeable
interchangeable cross-reference
interchangeable
10-2512Interchangeable
interchangeable cross-reference
interchangeable
28767SAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11193A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11193A?
11193A is a RESISTOR,FIXED,COMPOSITION.
What parts can replace 11193A?
There are 14 known substitutes for 11193A: 7185-012, B12-4R, 50083 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11193A?
11193A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11193A