PartsTable
Technical Data Sheet
Download PDF

111936-SS-1 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

111936-SS-1: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.75 INCHES NOMINAL IN, fastener_length: 0.75 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-723-5025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111936-SS-1
NSN: 5305-01-723-5025
FSC: 5305 — Screws
CAGE: 51506 — ACCURATE SCREW MACHINE CORP DIV ACCURATE SCREW MACHINE CORPORATION (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_class2A A
thread_length0.75 INCHES NOMINAL IN
fastener_length0.75 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
end_item_identification4540-01-700-3089
nominal_thread_diameter0.1640 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
part_name_assigned_by_controlling_agencyHEXAGON HEAD MACHINE SCREW
NSN5305-01-723-5025
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 111936-SS-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.75 INCHES NOMINAL IN
•
THREAD LENGTH: 0.75 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.1640 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FASTENER LENGTH0.75 INCHES NOMINAL IN
THREAD LENGTH0.75 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.1640 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYHEXAGON HEAD MACHINE SCREW
THREAD CLASS2A A
END ITEM IDENTIFICATION4540-01-700-3089
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
92314A197Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 111936-SS-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111936-SS-1?
111936-SS-1 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 111936-SS-1?
There is 1 known substitute for 111936-SS-1: 92314A197. Substitute compatibility should be verified for your specific system.
What is the NSN for 111936-SS-1?
111936-SS-1 is cataloged in the U.S. Government catalog under NSN 5305-01-723-5025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111936-SS-1