PartsTable / COMPONENT / 1118933
1118933
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The REGULATOR,ENGINE GENERATOR is a the manufacturer industrial component. Key specifications include shock_mount: PROVIDED, terminal_type: SCREW, mounting_style: THREE HOLE TRIANGULAR, system_voltage_rating: 12.0, mounting_hole_diameter: 0.312 INCHES NOMINAL IN, system_ground_polarity: POSITIVE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-219-0515, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1118933
NSN: 5330-00-219-0515 FSC: 5330 CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
shock_mount PROVIDED terminal_type SCREW mounting_style THREE HOLE TRIANGULAR terminal_quantity 3 system_voltage_rating 12.0 mounting_hole_diameter 0.312 INCHES NOMINAL IN system_ground_polarity POSITIVE circuit_control_device_type CUTOUT RELAY voltage_regulator_unit_type WIRE WOUND COIL voltage_regulator_unit_quantity 1 distance_between_holes_along_width 1.562 INCHES NOMINAL IN center_to_center_distance_between_holes_along_width_and_hole_along_length 5.125 INCHES NOMINAL IN NSN 5330-00-219-0515
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1118933
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• APERTURE DIAMETER: 1.375 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• BOLT CIRCLE DIAMETER: 2.000 INCHES NOMINAL IN
• FSC APPLICATION DATA: AIRCRAFT HYDRAULIC,VACUUM AND DE-ICING SYSTEMS COMPONENTS
• OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER 1.375 INCHES NOMINAL IN SPECIAL FEATURES 2 BOLT HOLES,0.094 IN. DIA ARE ON SEPARATE BOLT CIRCLE IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN BOLT CIRCLE DIAMETER 2.000 INCHES NOMINAL IN FSC APPLICATION DATA AIRCRAFT HYDRAULIC,VACUUM AND DE-ICING SYSTEMS COMPONENTS OUTSIDE DIAMETER 2.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1118933 Interchangeable interchangeable cross-reference
interchangeable
1118896 Interchangeable interchangeable cross-reference
interchangeable
4356170 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1118933?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1118933?
1118933 is a REGULATOR,ENGINE GENERATOR.
What parts can replace 1118933?
There are 3 known substitutes for 1118933: 1118933, 1118896, 4356170. Substitute compatibility should be verified for your specific system.
Is 1118933 still available?
1118933 is currently cancelled.
Request a Quote — 1118933