PartsTable
Technical Data Sheet
Download PDF

1118370 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1118370: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.625 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.141 INCHES NOMINAL IN, loop_inside_diameter: 11.500 INCHES NOMINAL IN, integral_nut_type_and_quantity: 1 SELF-LOCKING EQUAL LENGTH TONGUES. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-854-8020, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1118370
NSN: 5340-00-854-8020
FSC: 5340 — Hardware, Commercial
CAGE: 64547 — HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.625 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.141 INCHES NOMINAL IN
loop_inside_diameter11.500 INCHES NOMINAL IN
integral_nut_type_and_quantity1 SELF-LOCKING EQUAL LENGTH TONGUES
NSN5340-00-854-8020
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1118370 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL THICKNESS: 0.141 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 1 SELF-LOCKING EQUAL LENGTH TONGUES
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 11.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.141 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY1 SELF-LOCKING EQUAL LENGTH TONGUES
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER11.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
55910-1150SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1118370?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1118370?
1118370 is a CLAMP,LOOP.
What parts can replace 1118370?
There is 1 known substitute for 1118370: 55910-1150S. Substitute compatibility should be verified for your specific system.
What is the NSN for 1118370?
1118370 is cataloged in the U.S. Government catalog under NSN 5340-00-854-8020. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1118370