PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1117C
1117C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: COPPER ALLOY OVERALL, slot_depth: 0.068 INCHES SINGLE END IN, slot_width: 0.025 INCHES SINGLE END IN, swage_depth: 0.115 INCHES IN, hole_diameter: 0.250 INCHES NOMINAL IN, largest_width: 0.062 INCHES SINGLE END IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-680-5242, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1117C
NSN: 5310-00-680-5242
FSC: 5310
CAGE: 83330 — DIALIGHT CORPORATION (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
slot_depth0.068 INCHES SINGLE END IN
slot_width0.025 INCHES SINGLE END IN
swage_depth0.115 INCHES IN
hole_diameter0.250 INCHES NOMINAL IN
largest_width0.062 INCHES SINGLE END IN
overall_height0.271 INCHES IN
terminal_length0.125 INCHES IN
outside_diameter0.594 INCHES NOMINAL IN
overall_diameter0.062 INCHES IN
style_designatorFINISHING
basic_shape_styleTUBULAR, ROUND
NSN5310-00-680-5242
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1117C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FINISHING
•
SURFACE TREATMENT: NICKEL OVERALL
•
OUTSIDE DIAMETER: 0.594 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.250 INCHES NOMINAL IN
OVERALL HEIGHT0.094 INCHES NOMINAL IN
STYLE DESIGNATORFINISHING
SURFACE TREATMENTNICKEL OVERALL
OUTSIDE DIAMETER0.594 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
B3118Interchangeable
interchangeable cross-reference
interchangeable
649B3118Interchangeable
interchangeable cross-reference
interchangeable
752510Interchangeable
interchangeable cross-reference
interchangeable
456-C-1Interchangeable
interchangeable cross-reference
interchangeable
140-2089-03-01-00Interchangeable
interchangeable cross-reference
interchangeable
2024C-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1117C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1117C?
1117C is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 1117C?
There are 9 known substitutes for 1117C: B3118, 649B3118, 752510 and 6 more. Substitute compatibility should be verified for your specific system.
Is 1117C still available?
1117C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1117C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026