PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1117542
1117542 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, overall_length: 1.9900 INCHES NOMINAL IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.6350 INCHES MINIMUM AND 0.6450 INCHES MAXIMUM IN, body_outside_diameter: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-2704, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1117542
NSN: 5330-00-358-2704
FSC: 5330
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
corner_shapeSQUARE INSIDE LEFT CORNER
overall_length1.9900 INCHES NOMINAL IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.6350 INCHES MINIMUM AND 0.6450 INCHES MAXIMUM IN
body_outside_diameter0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
material_document_and_classificationQQ-T-825,COMP 4130 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-358-2704
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1117542 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
01053170Interchangeable
interchangeable cross-reference
interchangeable
ASTM D2464Interchangeable
interchangeable cross-reference
interchangeable
861-109Interchangeable
interchangeable cross-reference
interchangeable
986113-2BInterchangeable
interchangeable cross-reference
interchangeable
13264Interchangeable
interchangeable cross-reference
interchangeable
11-1-76-5-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1117542?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1117542?
1117542 is a GASKET.
What parts can replace 1117542?
There are 13 known substitutes for 1117542: 01053170, ASTM D2464, 861-109 and 10 more. Substitute compatibility should be verified for your specific system.
Is 1117542 still available?
1117542 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1117542

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026