PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1117-1-105
1117-1-105 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 42.0 DEGREES SECOND END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2A FIRST END A, exterior_color: BLACK, connection_type: INTERNALLY AND EXTERNALLY THREADED TUBE SECOND END, inside_diameter: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-737-2333, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1117-1-105
NSN: 4720-00-737-2333
FSC: 4720
CAGE: 34161 — KOEHRING CO (USA)
SPECIFICATIONS
seat_angle42.0 DEGREES SECOND END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2A FIRST END A
exterior_colorBLACK
connection_typeINTERNALLY AND EXTERNALLY THREADED TUBE SECOND END
inside_diameter0.125 INCHES NOMINAL IN
connection_styleINVERTED FLARE SECOND END
outside_diameter0.468 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure5000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.438 INCHES AND 0.625 INCHES SECOND END IN
NSN4720-00-737-2333
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 1117-1-105 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER
•
THREAD QUANTITY PER INCH: 2 SECOND END
•
CONNECTION STYLE: INVERTED FLARE SECOND END
•
OUTSIDE DIAMETER: 0.468 INCHES NOMINAL IN
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
THREAD DIRECTION: RIGHT-HAND SECOND END
•
END CONNECTION DESIGN: STRAIGHT SECOND END
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER
THREAD QUANTITY PER INCH2 SECOND END
CONNECTION STYLEINVERTED FLARE SECOND END
OUTSIDE DIAMETER0.468 INCHES NOMINAL IN
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
THREAD DIRECTIONRIGHT-HAND SECOND END
END CONNECTION DESIGNSTRAIGHT SECOND END
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
NOMINAL THREAD SIZE0.438 INCHES AND 0.625 INCHES SECOND END IN
THREAD CLASS2B AND 2A SECOND END A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
19339Interchangeable
interchangeable cross-reference
interchangeable
138017Interchangeable
interchangeable cross-reference
interchangeable
12805AInterchangeable
interchangeable cross-reference
interchangeable
827441Interchangeable
interchangeable cross-reference
interchangeable
8273Interchangeable
interchangeable cross-reference
interchangeable
T-8273Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1117-1-105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1117-1-105?
1117-1-105 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 1117-1-105?
There are 27 known substitutes for 1117-1-105: 19339, 138017, 12805A and 24 more. Substitute compatibility should be verified for your specific system.
Is 1117-1-105 still available?
1117-1-105 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1117-1-105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026