PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 111673-2
111673-2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The CYLINDER HEAD,GASOLINE ENGINE is a the manufacturer industrial component. Key specifications include special_features: 1 EA CYLINDER HEAD P/N P/N 13 26305, 1 EA CYLINDER HEAD CORE HOLE PLUGP/N 117921, end_item_identification: 3431-204-3832. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-207-7808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111673-2
NSN: 5305-00-207-7808
FSC: 5305
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
special_features1 EA CYLINDER HEAD P/N P/N 13 26305, 1 EA CYLINDER HEAD CORE HOLE PLUGP/N 117921
end_item_identification3431-204-3832
NSN5305-00-207-7808
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 111673-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.167 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
THREAD QUANTITY PER INCH: 64
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD HEIGHT: 0.037 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT CHAMFER
•
SCREW SURFACE TREATMENT: PASSIVATE
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.167 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
THREAD QUANTITY PER INCH64
INTERNAL DRIVE STYLESLOT
HEAD HEIGHT0.037 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
SCREW SURFACE TREATMENTPASSIVATE
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNF
SCREW MATERIALSTEEL COMP 303
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
2160G3009Interchangeable
interchangeable cross-reference
interchangeable
1116732Interchangeable
interchangeable cross-reference
interchangeable
1326309Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111673-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111673-2?
111673-2 is a CYLINDER HEAD,GASOLINE ENGINE.
What parts can replace 111673-2?
There are 3 known substitutes for 111673-2: 2160G3009, 1116732, 1326309. Substitute compatibility should be verified for your specific system.
What is the NSN for 111673-2?
111673-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-207-7808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111673-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026