PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11162-001
11162-001 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, bore_shape: STRAIGHT, body_height: 0.185 INCHES MAXIMUM IN, body_length: 0.785 INCHES MAXIMUM IN, bore_diameter: 9.7760 INCHES MINIMUM AND 9.7810 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-088-6902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11162-001
NSN: 3110-01-088-6902
FSC: 3110
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
body_height0.185 INCHES MAXIMUM IN
body_length0.785 INCHES MAXIMUM IN
bore_diameter9.7760 INCHES MINIMUM AND 9.7810 INCHES MAXIMUM IN
overall_width1.0000 INCHES NOMINAL IN
seal_quantity2
load_directionANGULAR
surface_finishGROUND
special_featuresNUCLEAR HARDNESS CRITICAL ITEMS
style_designator4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE
NSN3110-01-088-6902
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11162-001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
BEARING SEAL TYPE: CONTACT
•
SEAL QUANTITY: 2
•
MATERIAL: STEEL COMP E52100 BALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESINTEGRAL INTERNAL TOOTH SPUR GEAR W/120 TEETH IN BORE,12 HOLES EQUALLY SPACED ON 14.2500 IN. BOLT CIRCLE DIA ON ONE SIDE,12 HOLES EQUALLY SPACED ON 11.7500 IN. BOLT CIRCLE DIA ON OTHER SIDE IN
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
BEARING SEAL TYPECONTACT
SEAL QUANTITY2
MATERIALSTEEL COMP E52100 BALL
MATERIALSTEEL COMP 4340 INNER RING
STYLE DESIGNATOR4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
312849-001Interchangeable
interchangeable cross-reference
interchangeable
3597011-1Interchangeable
interchangeable cross-reference
interchangeable
MC74F32PInterchangeable
interchangeable cross-reference
interchangeable
990-1007-010Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11162-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11162-001?
11162-001 is a MICROCIRCUIT,DIGITAL.
What parts can replace 11162-001?
There are 4 known substitutes for 11162-001: 312849-001, 3597011-1, MC74F32P and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11162-001?
11162-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-088-6902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11162-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026