PartsTable
Technical Data Sheet
Download PDF

1116-01 — INSULATOR,PLATE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1116-01: INSULATOR,PLATE.

The INSULATOR,PLATE is a the manufacturer industrial component. Key specifications include material: COTTON OVERALL, case_style: SQUARE, seal_width: 0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN, material_form: VULCANIZED OVERALL, overall_width: 0.680 INCHES NOMINAL IN, overall_height: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-901-7310, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1116-01
NSN: 5330-00-901-7310
NIINs: 009017310, 011284526
FSC: 5330 — Packing and Gasket Materials
CAGE: 91587 — REXNORD INDUSTRIES, LLC DIV AEROSPACE SOLUTIONS DOWNERS GROVE (USA)
SPECIFICATIONS
materialCOTTON OVERALL
case_styleSQUARE
seal_width0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
material_formVULCANIZED OVERALL
overall_width0.680 INCHES NOMINAL IN
overall_height0.031 INCHES NOMINAL IN
overall_length0.950 INCHES NOMINAL IN
style_designatorFLAT, RECTANGULAR
first_hole_spacing0.270 INCHES NOMINAL IN
third_hole_spacing0.412 INCHES NOMINAL IN
first_hole_diameter0.109 INCHES NOMINAL IN
fourth_hole_spacing0.382 INCHES NOMINAL IN
NSN5330-00-901-7310
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1116-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 1.688 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.092 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER1.688 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.092 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
56689Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1116-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1116-01?
1116-01 is a INSULATOR,PLATE.
What parts can replace 1116-01?
There is 1 known substitute for 1116-01: 56689. Substitute compatibility should be verified for your specific system.
What is the NSN for 1116-01?
1116-01 is cataloged in the U.S. Government catalog under NSN 5330-00-901-7310. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1116-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.