PartsTable
Technical Data Sheet
Download PDF

11150023 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11150023: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_class: 22A A, thread_length: 0.300 INCHES NOMINAL IN, first_end_style: SQUARE, second_end_style: CHAMFERED, special_features: CTR SHOULDER FLATTED ON TWO SIDES. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-457-9254, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11150023
NSN: 5315-00-457-9254
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_class22A A
thread_length0.300 INCHES NOMINAL IN
first_end_styleSQUARE
second_end_styleCHAMFERED
special_featuresCTR SHOULDER FLATTED ON TWO SIDES
style_designatorSHOULDER
thread_directionRIGHT-HAND
first_step_length0.430 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
third_step_length0.300 INCHES NOMINAL IN
first_end_locationTHREADED END
NSN5315-00-457-9254
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11150023 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
•
FIRST END LOCATION: THREADED END
•
THIRD STEP DIAMETER: 0.112 INCHES NOMINAL IN
•
SECOND END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
THREAD LENGTH: 0.300 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
SECOND STEP LENGTH: 0.190 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
FIRST STEP DIAMETER0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
FIRST END LOCATIONTHREADED END
THIRD STEP DIAMETER0.112 INCHES NOMINAL IN
SECOND END TAPER ANGLE15.0 DEGREES NOMINAL
THREAD LENGTH0.300 INCHES NOMINAL IN
FIRST END STYLESQUARE
SECOND STEP LENGTH0.190 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
SECOND END TAPER LENGTH0.190 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 11150023?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11150023?
11150023 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 11150023?
11150023 is cataloged in the U.S. Government catalog under NSN 5315-00-457-9254. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11150023