PartsTable
Technical Data Sheet
Download PDF

11149-2 — COUPLING,SHAFT,FLEXIBLE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11149-2: COUPLING,SHAFT,FLEXIBLE.

The COUPLING,SHAFT,FLEXIBLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT BOTH ENDS, bore_length: 0.3125 INCHES NOMINAL BOTH ENDS IN, design_type: BONDED RUBBER, bore_diameter: 0.2500 INCHES NOMINAL BOTH ENDS IN, overall_length: 0.812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3010-00-294-5757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11149-2
NSN: 3010-00-294-5757
NIINs: 002945757, 004857971, 011272520
FSC: 3010 — Torque Converters and Speed Changers
CAGE: 99380 — SIERRA NETWORKS INC SIERRACOM DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT BOTH ENDS
bore_length0.3125 INCHES NOMINAL BOTH ENDS IN
design_typeBONDED RUBBER
bore_diameter0.2500 INCHES NOMINAL BOTH ENDS IN
overall_length0.812 INCHES NOMINAL IN
securing_methodTHREADED HOLE(S) BOTH ENDS
outside_diameter0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
special_featuresOVERALL LENGTH 1.750 IN.; WEAPON SYSTEM ESSENTIAL IN
surface_treatmentPASSIVATE OVERALL
supplementary_featuresSENSOR, TEMP - WINSHIELD OVERHEAT
thread_size_designator0.112-40 BOTH ENDS
NSN3010-00-294-5757
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available COUPLING,SHAFT,FLEXIBLE TITLE COMPONENT PN 11149-2 MFR COUPLING,SHAFT,FLEXIBL
KEY FEATURES
•
SECURING METHOD: THREADED HOLE(S) BOTH ENDS
•
THREADED HOLE LOCATION: BOTH ENDS: CENTERED 0.109 IN. FROM FACE OF HUB IN
•
BORE LENGTH: 0.3125 INCHES NOMINAL BOTH ENDS IN
•
DESIGN TYPE: BONDED RUBBER
•
OUTSIDE DIAMETER: 0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT BOTH ENDS
•
THREADED HOLE QUANTITY: 1 BOTH ENDS
TECHNICAL CHARACTERISTICS
SECURING METHODTHREADED HOLE(S) BOTH ENDS
THREADED HOLE LOCATIONBOTH ENDS: CENTERED 0.109 IN. FROM FACE OF HUB IN
BORE LENGTH0.3125 INCHES NOMINAL BOTH ENDS IN
DESIGN TYPEBONDED RUBBER
OVERALL LENGTH0.812 INCHES NOMINAL IN
OUTSIDE DIAMETER0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT BOTH ENDS
THREADED HOLE QUANTITY1 BOTH ENDS
THREAD SIZE DESIGNATOR0.112-40 BOTH ENDS
BORE DIAMETER0.2500 INCHES NOMINAL BOTH ENDS IN
SUBSTITUTES & CROSS-REFERENCES 2
015-0162-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SK1947-40Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11149-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11149-2?
11149-2 is a COUPLING,SHAFT,FLEXIBLE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11149-2?
There are 2 known substitutes for 11149-2: 015-0162-000, SK1947-40. Substitute compatibility should be verified for your specific system.
What is the NSN for 11149-2?
11149-2 is cataloged in the U.S. Government catalog under NSN 3010-00-294-5757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11149-2