PartsTable
Technical Data Sheet
PartsTable / MRO / 11144-3
11144-3 ✓ Verified by PartsTable
Beko · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,FILM is a Beko industrial component. Key specifications include length: 7.688 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, thickness: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, body_length: 0.810 INCHES NOMINAL IN, body_diameter: 0.310 INCHES NOMINAL IN, hole_diameter: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-498-9855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11144-3
NSN: 5310-00-498-9855
FSC: 5310
CAGE: 82271 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC CARTRIDGE SYSTEMS DIVISION (USA)
SPECIFICATIONS
length7.688 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
thickness0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
body_length0.810 INCHES NOMINAL IN
body_diameter0.310 INCHES NOMINAL IN
hole_diameter0.625 INCHES NOMINAL IN
spiral_designSINGLE
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
overall_length6.000 INCHES NOMINAL IN
overall_diameter0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
NSN5310-00-498-9855
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11144-3 · Beko ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OVERALL DIAMETER: 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.625 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL DIAMETER0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
111443Interchangeable
interchangeable cross-reference
interchangeable
DA2-48751FInterchangeable
interchangeable cross-reference
interchangeable
11144Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11144-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11144-3?
11144-3 is a RESISTOR,FIXED,FILM manufactured by Beko. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11144-3?
There are 3 known substitutes for 11144-3: 111443, DA2-48751F, 11144. Substitute compatibility should be verified for your specific system.
What is the NSN for 11144-3?
11144-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-498-9855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11144-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026