1114306-3 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1114306-3: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.147 INCHES NOMINAL IN, material: ALUMINUM ALLOY BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-958-4070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1114306-3

NSN: 5340-00-958-4070
FSC: 5340 — Hardware, Commercial
CAGE: 83298 — ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE (USA)

SPECIFICATIONS

diameter	0.147 INCHES NOMINAL IN
material	ALUMINUM ALLOY BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.187 INCHES NOMINAL IN
end_item_identification	W/S:HELICOPTER,CH-53A/D/E; HELICOPTER,RH-53 A
distance_from_loop_center_to_tongue_end	0.603 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.415 INCHES NOMINAL IN
NSN	5340-00-958-4070

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.147 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.603 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.415 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.147 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.603 INCHES NOMINAL IN
END ITEM IDENTIFICATION	W/S:HELICOPTER,CH-53A/D/E; HELICOPTER,RH-53 A
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.415 INCHES NOMINAL IN
MATERIAL	ALUMINUM ALLOY BAND
MATERIAL	RUBBER CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

TA564WD3HRSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1114306-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1114306-3?

1114306-3 is a CLAMP,LOOP.

What parts can replace 1114306-3?

There is 1 known substitute for 1114306-3: TA564WD3HR. Substitute compatibility should be verified for your specific system.

What is the NSN for 1114306-3?

1114306-3 is cataloged in the U.S. Government catalog under NSN 5340-00-958-4070. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1114306-3 — CLAMP,LOOP

Request a Quote — 1114306-3