PartsTable
Technical Data Sheet
Download PDF

111413 — BRACKET,EYE,NONROTATING SHAFT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

111413: BRACKET,EYE,NONROTATING SHAFT.

The BRACKET,EYE,NONROTATING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL, hole_diameter: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSED, overall_height: 0.635 INCHES NOMINAL IN, overall_length: 1.150 INCHES NOMINAL IN, document_source: 55752. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-0786, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111413
NSN: 5310-00-209-0786
NIINs: 002090786, 012517637, 013305057, 014227528
FSC: 5310 — Nuts and Washers
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL
hole_diameter0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_height0.635 INCHES NOMINAL IN
overall_length1.150 INCHES NOMINAL IN
document_source55752
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating20.0 KILOHERTZ MINIMUM SINGLE COMPONENT
outside_diameter0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
overall_diameter0.710 INCHES NOMINAL IN
style_designatorFLAT EXTERNAL TEETH
NSN5310-00-209-0786
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 111413 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT EXTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
END ITEM IDENTIFICATIONW/S:AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); COMPRESSOR, RECIPROCATING M4; AIRBORNE MOBILE DIR AIR SPT CTL (2ID), (02M JUL83)(AN/UYQ-3A); AVIATION ENGINE TEST SYSTEMS (AETS); SUPPORT EQUIPMENT, B-1 AIRCRAFT; CENTRAL MESSAGE SWITCH, AN/TYC-39A; BOILE; MEDIUM MINE PROTECTED VEHICLE - MMPV; ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE A
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
121753Reference document
Same NSN cross-reference
Reference document — Secondary reference
801625-551-003 PC NO 17AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
114604Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
373-5042-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
853-1013Reference document
Same NSN cross-reference
Reference document — Secondary reference
1114-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 111413?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111413?
111413 is a BRACKET,EYE,NONROTATING SHAFT.
What parts can replace 111413?
There are 9 known substitutes for 111413: 121753, 801625-551-003 PC NO 17A, 114604 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111413?
111413 is cataloged in the U.S. Government catalog under NSN 5310-00-209-0786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111413

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.