PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1114-13
1114-13 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRACKET,EYE,NONROTATING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL, hole_diameter: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSED, overall_height: 0.635 INCHES NOMINAL IN, overall_length: 1.150 INCHES NOMINAL IN, document_source: 55752. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0786, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1114-13
NSN: 5310-00-209-0786
FSC: 5310
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL
hole_diameter0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_height0.635 INCHES NOMINAL IN
overall_length1.150 INCHES NOMINAL IN
document_source55752
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating20.0 KILOHERTZ MINIMUM SINGLE COMPONENT
outside_diameter0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
overall_diameter0.710 INCHES NOMINAL IN
style_designatorFLAT EXTERNAL TEETH
NSN5310-00-209-0786
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1114-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
•
OUTSIDE DIAMETER: 0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONW/S:AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); COMPRESSOR, RECIPROCATING M4; AIRBORNE MOBILE DIR AIR SPT CTL (2ID), (02M JUL83)(AN/UYQ-3A); AVIATION ENGINE TEST SYSTEMS (AETS); SUPPORT EQUIPMENT, B-1 AIRCRAFT; CENTRAL MESSAGE SWITCH, AN/TYC-39A; BOILE; MEDIUM MINE PROTECTED VEHICLE - MMPV; ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE A
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1552 OR STEEL COMP 1053 OR STEEL COMP 1055 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
OUTSIDE DIAMETER0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT EXTERNAL TEETH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
490250Interchangeable
interchangeable cross-reference
interchangeable
407127Interchangeable
interchangeable cross-reference
interchangeable
114604Interchangeable
interchangeable cross-reference
interchangeable
0914105-2Interchangeable
interchangeable cross-reference
interchangeable
BEAX7FInterchangeable
interchangeable cross-reference
interchangeable
111400Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1114-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1114-13?
1114-13 is a BRACKET,EYE,NONROTATING SHAFT.
What parts can replace 1114-13?
There are 30 known substitutes for 1114-13: 490250, 407127, 114604 and 27 more. Substitute compatibility should be verified for your specific system.
Is 1114-13 still available?
1114-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1114-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026