PartsTable
Technical Data Sheet
Download PDF

111364-3-9 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

111364-3-9: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: HEXAGON, grip_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, head_height: 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-131-5482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111364-3-9
NSN: 5306-01-131-5482
FSC: 5306 — Bolts
CAGE: K5673 — SPS TECHNOLOGIES LTD, TJ BROOKS DIVISION (GBR)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
head_styleHEXAGON
grip_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
head_height0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length0.885 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentALUMINUM AND CHROMATE OVERALL
width_between_flats0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
NSN5306-01-131-5482
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 111364-3-9 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
HEAD HEIGHT: 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.885 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH16.0 MICROINCHES THREADS
HEAD HEIGHT0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FASTENER LENGTH0.885 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488 TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONNAS 621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 6
801651-3-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
MB251-3-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
VS3207-3-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
SC2663-3-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST3M731-3-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PBF1264-3-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 111364-3-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111364-3-9?
111364-3-9 is a BOLT,CLOSE TOLERANCE.
What parts can replace 111364-3-9?
There are 6 known substitutes for 111364-3-9: 801651-3-9, MB251-3-9, VS3207-3-9 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111364-3-9?
111364-3-9 is cataloged in the U.S. Government catalog under NSN 5306-01-131-5482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111364-3-9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.