PartsTable
Technical Data Sheet
Download PDF

111290-3-28 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

111290-3-28: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 1.672 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN, screw_material: TITANIUM ALLOY UNS R56400, fastener_length: 1.736 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-348-8093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111290-3-28
NSN: 5305-01-348-8093
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_class3A A
thread_length1.672 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
screw_materialTITANIUM ALLOY UNS R56400
fastener_length1.736 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
NSN5305-01-348-8093
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 111290-3-28 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.736 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 1.672 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FASTENER LENGTH1.736 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH1.672 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
SCREW MATERIALTITANIUM ALLOY UNS R56400
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
AIC4414-3-28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03A292-3-28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SC5084-3-28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 111290-3-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111290-3-28?
111290-3-28 is a SCREW,MACHINE.
What parts can replace 111290-3-28?
There are 3 known substitutes for 111290-3-28: AIC4414-3-28, 03A292-3-28, SC5084-3-28. Substitute compatibility should be verified for your specific system.
What is the NSN for 111290-3-28?
111290-3-28 is cataloged in the U.S. Government catalog under NSN 5305-01-348-8093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111290-3-28

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.