Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, corner_shape: SQUARE ALL CORNERS, shaft_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5330-00-383-9803, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→111204
NSN:5330-00-383-9803 FSC:5330 CAGE:29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
material
PLASTIC POLYAMIDE NYLON OVERALL
body_style
CYLINDRICAL BUSHING MOUNTED
body_length
0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
shaft_style
ROUND, SLOTTED
corner_shape
SQUARE ALL CORNERS
shaft_length
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
actuator_type
SINGLE SHAFT
body_diameter
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
hole_diameter
0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length
1.0000 INCHES NOMINAL IN
shaft_diameter
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
mounting_method
LOCKING BUSHING
NSN
5330-00-383-9803
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: CELLULOSE OVERALL
•
APERTURE DIAMETER: 3.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 4.375 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
HOLE DIAMETER
0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATOR
CIRCULAR
MATERIAL
CELLULOSE OVERALL
APERTURE DIAMETER
3.188 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.020 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER
4.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY
6
SPECIAL FEATURES
ONE 0.312 IN. DIA HOLE CENTERED 0.312 IN. FROM VERTICAL CENTER LINE AND 1.812 IN. FROM HORIZONTAL CENTER LINE IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111204?
111204 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 111204?
There are 40 known substitutes for 111204: C180-022-0500S, C0180-022-0500S, 3070-2 and 37 more. Substitute compatibility should be verified for your specific system.
Is 111204 still available?
111204 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.