PartsTable
Technical Data Sheet
Download PDF

1112.120 — CABLE,POWER,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1112.120: CABLE,POWER,ELECTRICAL.

The CABLE,POWER,ELECTRICAL is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include material: STEEL COMP 321 OVERALL, overall_width: 0.5000 INCHES NOMINAL IN, special_features: CUSHION SHOULD BE POLYTETRAFLUOROETHYLENE IMPR. PBI/POLYAMID/GLASS FIBER BLEND TYPE 139, style_designator: SINGLE LOOP, material_thickness: 0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, loop_inside_diameter: 1.250 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-412-2721, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1112.120
NSN: 5340-01-412-2721
NIINs: 014122721, 016857861
FSC: 5340 — Hardware, Commercial
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
materialSTEEL COMP 321 OVERALL
overall_width0.5000 INCHES NOMINAL IN
special_featuresCUSHION SHOULD BE POLYTETRAFLUOROETHYLENE IMPR. PBI/POLYAMID/GLASS FIBER BLEND TYPE 139
style_designatorSINGLE LOOP
material_thickness0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
loop_inside_diameter1.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.125 INCHES NOMINAL IN
NSN5340-01-412-2721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1112.120 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.125 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 OVERALL
•
LOOP INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.5000 INCHES NOMINAL IN
MATERIAL THICKNESS0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.125 INCHES NOMINAL IN
SPECIAL FEATURESCUSHION SHOULD BE POLYTETRAFLUOROETHYLENE IMPR. PBI/POLYAMID/GLASS FIBER BLEND TYPE 139
MATERIALSTEEL COMP 321 OVERALL
LOOP INSIDE DIAMETER1.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1112.120?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1112.120?
1112.120 is a CABLE,POWER,ELECTRICAL.
What is the NSN for 1112.120?
1112.120 is cataloged in the U.S. Government catalog under NSN 5340-01-412-2721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1112.120