PartsTable
Technical Data Sheet
Download PDF

111130 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Peach · MRO · MRO_GENERAL
PRODUCT OVERVIEW

111130: CONE AND ROLLERS,TAPERED ROLLER.

Toner modules from Peach ensure superb printouts with quality that remains consistent over the long run. The units are remanufactured, in a process that includes 100% replacement of all components subject to wear. Quality you can feel!

This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-0220, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 111130
NSN: 3110-00-100-0220
NIINs: 001000220, 012962810, 016075897
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8750 INCHES NOMINAL IN
bore_diameter2.0000 INCHES NOMINAL IN
special_featuresBERINGS TAPPERED WITH ROLLERS
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
end_item_identificationMRAP BUFFALO MK2A2
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0220
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 111130 · Peach ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 0.8750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH0.8750 INCHES NOMINAL IN
SPECIAL FEATURESBERINGS TAPPERED WITH ROLLERS
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.0000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
59722HReference document
Same NSN cross-reference
Reference document — Secondary reference
25289Reference document
Same NSN cross-reference
Reference document — Secondary reference
915862Reference document
Same NSN cross-reference
Reference document — Secondary reference
38050Reference document
Same NSN cross-reference
Reference document — Secondary reference
61-4221Reference document
Same NSN cross-reference
Reference document — Secondary reference
368ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 111130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111130?
111130 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Peach. It is classified as a MRO (MRO_GENERAL).
What parts can replace 111130?
There are 8 known substitutes for 111130: 59722H, 25289, 915862 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111130?
111130 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111130

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.