PartsTable
Technical Data Sheet
Download PDF

11113 — BACKSHELL,ELECTRICAL CONNECTOR

✓ Government record, cited
Iomega · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11113: BACKSHELL,ELECTRICAL CONNECTOR.

Zip® drives offer you the capacity you need and the ruggedness you demand for everyday use. With firmware-based password protection, drag-and-drop file management, and high read-write speeds, the ZIP platform continues to be a favorite portable storage solution for users today. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-276-4145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11113
NSN: 5315-00-276-4145
NIINs: 002764145, 002933385, 004771005, 006287809, 008052089, 008111848, 008304742, 008727508, 009271542, 010821902, 011420257, 011468866, 012471187, 012930183, 013959073, 014285273, 014341781, 014471852, 014688849, 014937942, 015161586, 015257554, 016776697
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 55819 — DIAMOND ELECTRONICS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
drill_length1.25 INCHES NOMINAL IN
special_featuresSHORT SERIES, FOR DRILLING HARD TOUGH HIGH TENSILE STRENG
part_name_assigned_by_controlling_agencyTHREADED SHANK ADAPTER DRILL
NSN5315-00-276-4145
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11113 · Iomega ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.938 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.109 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.375 INCHES NOMINAL IN
•
DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.938 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.109 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
DIAMETER0.250 INCHES NOMINAL IN
HEAD STYLEFLAT
HEIGHT0.094 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 10
3-12085PC14Reference document
Same NSN cross-reference
Reference document — Secondary reference
N3-19015-20Reference document
Same NSN cross-reference
Reference document — Secondary reference
N3-18179PC459Reference document
Same NSN cross-reference
Reference document — Secondary reference
N3-20114PC20Reference document
Same NSN cross-reference
Reference document — Secondary reference
12454-1PC412Reference document
Same NSN cross-reference
Reference document — Secondary reference
N3-9727PC412Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11113?
11113 is a BACKSHELL,ELECTRICAL CONNECTOR manufactured by Iomega. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11113?
There are 10 known substitutes for 11113: 3-12085PC14, N3-19015-20, N3-18179PC459 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11113?
11113 is cataloged in the U.S. Government catalog under NSN 5315-00-276-4145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11113

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.