PartsTable
Technical Data Sheet
PartsTable / MRO / 1111003
1111003 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: STEEL COMP 420 OVERALL, head_style: HEXAGON, hole_diameter: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN, thread_length: 0.75 INCHES NOMINAL IN, fastener_length: 0.75 INCHES NOMINAL IN, mounting_method: THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-869-4199, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1111003
NSN: 5310-00-869-4199
FSC: 5310
CAGE: 59440 — TELEVISO CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 420 OVERALL
head_styleHEXAGON
hole_diameter0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
thread_length0.75 INCHES NOMINAL IN
fastener_length0.75 INCHES NOMINAL IN
mounting_methodTHREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY
outside_diameter0.293 INCHES NOMINAL IN
special_featuresZINC FINISH
style_designatorSPLIT HELICAL-RIGHT HAND
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.040 INCHES NOMINAL IN
NSN5310-00-869-4199
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1111003 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: B CLASS AND 2 STYLE
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.293 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 420 OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAB CLASS AND 2 STYLE
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); LOGISTICS SUPPORT VESSEL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.293 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 420 OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
429067Interchangeable
interchangeable cross-reference
interchangeable
98210ADXInterchangeable
interchangeable cross-reference
interchangeable
61724020008Interchangeable
interchangeable cross-reference
interchangeable
5310PL1370038Interchangeable
interchangeable cross-reference
interchangeable
50-30-8Interchangeable
interchangeable cross-reference
interchangeable
273710Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1111003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1111003?
1111003 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1111003?
There are 26 known substitutes for 1111003: 429067, 98210ADX, 61724020008 and 23 more. Substitute compatibility should be verified for your specific system.
Is 1111003 still available?
1111003 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1111003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026