PartsTable
Technical Data Sheet
Download PDF

1110PC265C — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1110PC265C: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.875 INCHES NOMINAL IN, first_hole_diameter: 0.1065 INCHES NOMINAL IN, pin_overall_diameter: 0.3750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-768-4251, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1110PC265C
NSN: 5315-00-768-4251
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80256 — OUTBOARD MARINE CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.875 INCHES NOMINAL IN
first_hole_diameter0.1065 INCHES NOMINAL IN
pin_overall_diameter0.3750 INCHES NOMINAL IN
second_hole_diameter0.156 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes1.563 INCHES NOMINAL IN
NSN5315-00-768-4251
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1110PC265C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.1065 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.3750 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.875 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.1065 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3750 INCHES NOMINAL IN
PIN OVERALL LENGTH1.875 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.156 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES1.563 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
552905Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1110PC265C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1110PC265C?
1110PC265C is a PIN,STRAIGHT,HEADLESS.
What parts can replace 1110PC265C?
There is 1 known substitute for 1110PC265C: 552905. Substitute compatibility should be verified for your specific system.
What is the NSN for 1110PC265C?
1110PC265C is cataloged in the U.S. Government catalog under NSN 5315-00-768-4251. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1110PC265C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.