PartsTable
Technical Data Sheet
Download PDF

111064 — STANDOFF,THREADED,SPACING

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

111064: STANDOFF,THREADED,SPACING.

- With pleasing retro design. - Trapezium-shaped, round espresso cup shape. - Packed in an exclusive gift package.

- Dishwasher Safe: Yes. - Food Safe: Yes. - Microwave Safe: Yes.

- Model: Espresso Cups. - Number of Cups: 2. - Number of Saucer: 2.

- Number Component Set: 4. - Diameter Cup: 6.5 cm. - Diameter Saucer: 12 cm.

- Height Cup: 5 cm. This part is cataloged in the U.S. Government catalog under NSN 5340-00-427-1700, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111064
NSN: 5340-00-427-1700
FSC: 5340 — Hardware, Commercial
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
length0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
groove_width0.050 INCHES NOMINAL IN
groove_diameter0.144 INCHES NOMINAL IN
shoulder_length0.140 INCHES NOMINAL IN
shoulder_diameter0.217 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
width_across_flats0.250 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
left_counterbore_depth0.330 INCHES MINIMUM IN
left_counterbore_diameter0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
NSN5340-00-427-1700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 111064 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LEFT COUNTERBORE DEPTH: 0.330 INCHES MINIMUM IN
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
GROOVE DIAMETER: 0.144 INCHES NOMINAL IN
•
LEFT COUNTERBORE DIAMETER: 0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
•
SHOULDER DIAMETER: 0.217 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
•
SHOULDER LENGTH: 0.140 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LEFT COUNTERBORE DEPTH0.330 INCHES MINIMUM IN
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
LENGTH0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
GROOVE DIAMETER0.144 INCHES NOMINAL IN
LEFT COUNTERBORE DIAMETER0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGON
SHOULDER DIAMETER0.217 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
SHOULDER LENGTH0.140 INCHES NOMINAL IN
GROOVE WIDTH0.050 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 111064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111064?
111064 is a STANDOFF,THREADED,SPACING manufactured by Hama.
What is the NSN for 111064?
111064 is cataloged in the U.S. Government catalog under NSN 5340-00-427-1700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111064