PartsTable
Technical Data Sheet
Download PDF

111046 — BLADE,WINDSHIELD WIPER

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

111046: BLADE,WINDSHIELD WIPER.

- Suitable for 32 Tassimo capsules. - Elegant wire framing allows different types of coffee capsules to be stored and sorted in a clear manner. - 2 wire holders that each hold up to 16 capsules.

- High-quality chromium plating. - Dimensions (WxHxD): 19.5 x 29 x 10 cm. - Packed in a cardboard box (1 piece).

- Capsule Capacity Max.: 32. - Installation: Free-Standing. - Suitable for: Tassimo Capsules.

- Colour: Silver. - Width: 19,5 cm. - Height: 29 cm.

- Depth: 10 cm. - Material: Metal. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-597-3268, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
111046
NSN: 5340-00-597-3268
NIINs: 005973268, 013370237
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter0.751 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
materialALUMINUM ALLOY
thickness0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
machined_surface_finishGROUND
material_document_and_classificationAMS 4120 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-597-3268
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 111046 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MACHINED SURFACE FINISH: GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4120 ASSN STD SINGLE MATERIAL RESPONSE
•
DIAMETER: 0.751 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY
•
THICKNESS: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MACHINED SURFACE FINISHGROUND
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4120 ASSN STD SINGLE MATERIAL RESPONSE
DIAMETER0.751 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY
THICKNESS0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 111046?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111046?
111046 is a BLADE,WINDSHIELD WIPER manufactured by Hama.
What is the NSN for 111046?
111046 is cataloged in the U.S. Government catalog under NSN 5340-00-597-3268. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111046

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.