PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 111-322
111-322 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include overall_width: 2.100 INCHES NOMINAL IN, overall_height: 1.313 INCHES NOMINAL IN, overall_length: 2.306 INCHES NOMINAL IN, component_type_and_quantity: 3 CAPACITOR AND 1 BOARD AND 6 CONTACT AND 10 RESISTOR AND 3 TRANSISTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111-322
NSN: 3110-00-100-0214
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
overall_width2.100 INCHES NOMINAL IN
overall_height1.313 INCHES NOMINAL IN
overall_length2.306 INCHES NOMINAL IN
special_featuresMAJOR COMPONENTS: POTENTIOMETER 1; MOUNTING METHOD: MOUNTS BY INSERTING INTO MATING CONTACTS AND GUIDES ON PRINTED CIRCUIT ASSEMBLY; MOUNTING CONFIGURATION: CONTACTS IRREGULARLY SPACED
component_type_and_quantity3 CAPACITOR AND 1 BOARD AND 6 CONTACT AND 10 RESISTOR AND 3 TRANSISTOR
NSN3110-00-100-0214
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 111-322 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 0.8540 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
BORE DIAMETER: 1.7716 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH0.8540 INCHES NOMINAL IN
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
BORE DIAMETER1.7716 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
193067Interchangeable
interchangeable cross-reference
interchangeable
RC7158Interchangeable
interchangeable cross-reference
interchangeable
4912568-01Interchangeable
interchangeable cross-reference
interchangeable
10082457Interchangeable
interchangeable cross-reference
interchangeable
C12501Interchangeable
interchangeable cross-reference
interchangeable
12501Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111-322?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111-322?
111-322 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 111-322?
There are 28 known substitutes for 111-322: 193067, RC7158, 4912568-01 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111-322?
111-322 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111-322

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026