PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 111-10-0340
111-10-0340 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.500 INCHES NOMINAL IN, outside_diameter: 0.922 INCHES NOMINAL IN, operating_pressure: 1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-881-1253, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111-10-0340
NSN: 4720-00-881-1253
FSC: 4720
CAGE: 03924 — PARKER HANNIFIN CORPORATION DIV FLUID CONNECTOR SERVICE CENTER - LOUISVILLE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.500 INCHES NOMINAL IN
outside_diameter0.922 INCHES NOMINAL IN
operating_pressure1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
media_for_which_designedAIR AND ETHYLENE GLYCOL AND FUEL/OIL, HYDROCARBON AND WATER, FRESH SINGLE RESPONSE
hydrostatic_test_pressure3500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
measuring_method_and_length34.000 INCHES NOMINAL OVERALL IN
specification/standard_data15434-106117 MANUFACTURERS SOURCE CONTROL
NSN4720-00-881-1253
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 111-10-0340 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MINIMUM INSIDE BENDING RADIUS: 5.500 INCHES IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 0.922 INCHES NOMINAL IN
•
MEDIA FOR WHICH DESIGNED: AIR AND ETHYLENE GLYCOL AND FUEL/OIL, HYDROCARBON AND WATER, FRESH SINGLE RESPONSE
•
HYDROSTATIC TEST PRESSURE: 3500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 15434-106117 MANUFACTURERS SOURCE CONTROL
•
OPERATING PRESSURE: 1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MINIMUM INSIDE BENDING RADIUS5.500 INCHES IN
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER0.922 INCHES NOMINAL IN
MEDIA FOR WHICH DESIGNEDAIR AND ETHYLENE GLYCOL AND FUEL/OIL, HYDROCARBON AND WATER, FRESH SINGLE RESPONSE
HYDROSTATIC TEST PRESSURE3500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA15434-106117 MANUFACTURERS SOURCE CONTROL
OPERATING PRESSURE1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND WATER RESISTANT
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
20-11110Interchangeable
interchangeable cross-reference
interchangeable
5999PL0906252Interchangeable
interchangeable cross-reference
interchangeable
11110Interchangeable
interchangeable cross-reference
interchangeable
67A312D23Interchangeable
interchangeable cross-reference
interchangeable
1061-17Interchangeable
interchangeable cross-reference
interchangeable
BA10108-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111-10-0340?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111-10-0340?
111-10-0340 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 111-10-0340?
There are 19 known substitutes for 111-10-0340: 20-11110, 5999PL0906252, 11110 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111-10-0340?
111-10-0340 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-881-1253. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111-10-0340

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026