PartsTable
Technical Data Sheet
PartsTable / MRO / 111-0001-14
111-0001-14 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-900-9439, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 111-0001-14
NSN: 5331-00-900-9439
FSC: 5331 — O-RING
CAGE: 18350 — PALL AEROPOWER CORPORATION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.603 INCHES MINIMUM AND 0.621 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-900-9439
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 111-0001-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
675-00114Interchangeable
interchangeable cross-reference
interchangeable
ARP-114Interchangeable
interchangeable cross-reference
interchangeable
C-4261PL912PC13Interchangeable
interchangeable cross-reference
interchangeable
4V15877-2Interchangeable
interchangeable cross-reference
interchangeable
11-1-000114Interchangeable
interchangeable cross-reference
interchangeable
M21097/21-094Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111-0001-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111-0001-14?
111-0001-14 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 111-0001-14?
There are 7 known substitutes for 111-0001-14: 675-00114, ARP-114, C-4261PL912PC13 and 4 more. Substitute compatibility should be verified for your specific system.
Is 111-0001-14 still available?
111-0001-14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111-0001-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026